KBS Coating Australia, Fire Protection System, Cable Spraying, Cable Coating Australia, KBS Coating Installer, Fire Stop System, Painting Contractors, Fireproofing, Penetration Seals, Fireproofing Spray
Showing posts with label Cable Coating. Show all posts
Showing posts with label Cable Coating. Show all posts

Wednesday, November 2, 2011

Fire Detection and Exit Measures at Schools for Fireproofing System

Posted by Fire Protection Coatings on 12:29 AM 0 comments

Every School Management should ensure that there are adequate means to warn people of a fire in the school premises. School Fire Protection could take the form of School KBS Coatings or School Painting Services Australia in larger premises, while in small schools it could be whistles, hand bells, or manually operated fire alarm bell. The key point is to make sure that the fire alarm system can be heard throughout the entire school during an emergency.


A Fireproofing System is of considerable value in providing protection against fire in schools. If not covered promptly, a fire can grow and spread to a level that will be difficult to extinguish. A School Fire Protection system must be monitored throughout the year to enable early detection of a fire even when there is not a single person on the premises or if the fire breaks out in a concealed space.

Smoke and heat detectors should be installed and inspected every six months to make sure that they are working properly. Additionally, batteries in battery operated detectors should be exchanged at least once a year. Moreover, Adequate fire alarm call points should be installed all around the school.

The common causes of fire in schools can be malicious fire, External waste mismanagement, inadequate control of building contractors, Poor housekeeping or storage arrangement and Electrical fires.

Let us see, what can be the means of escape in case of a fire break out in schools?

(a) School Authorities should make sure that there are an adequate number of exits from school buildings and places of assembly. However the number of exits required for a given building or assembly place depends on the maximum number of people that can occupy a space or the capacity of each exit as well as the travel distance required. You can consult with your local Fire Officer so as to know the number of exits required in your particular building.

(b) Fire escape routes in the premises must be clearly marked and all fire escape signs should be stick in places that clearly indicate escape routes.

(c) Keep exit doors unlocked whenever the building or space is occupied. You can use push bars where School Maintenance or security concerns require doors to be locked from the outside.


These means of escape from fire can help you to protect children and other staff members of school during fire. But having School KBS Coatings or School Painting Services Australia can keep you away from fire altogether. Precaution is always considered better than cure. Hence School buildings must be adequately fire protected with painting or coatings. Children are our future and their education directly relates to our growth. Ensuring School Fire Protection is key to it.

Robertson Coatings is a Dulux accredited company specialized in Painting and Maintenance programs with Interior Fireproofing for Schools, Commercial Buildings, Large Domestic, Large Industrial, Maintenance Programs. It is a Australian certified applicator for interior fireproofing and KBS Coating and KBS Fire-stopping system.

Continue...


Friday, October 14, 2011

Current Landscape of Steel Structures and its Fireproofing

Posted by Fire Protection Coatings on 3:55 AM 2 comments

Fireproofing is done by applying fire resistant covering materials to thermally protect the underlying steel from the heat of the fire. There have been many significant technological advancements in the development and commercialization of innovative and new generation fireproofing materials. As a result fire proofing has become cost effective with the use of lighter weight boards, lower density fireproofing sprays, increase in thermal efficiency and the advent of Fireproofing Paints or coatings. However, the industry has still not been able to keep itself abreast of these developments.

Steel structures, consist of structural steel connections, fasteners and frames that act together in resisting actions such as loads, pressures, displacements, strains, etc. Load bearing steel framed building structures need to cater the load including the load of dead building itself. We need to pay special attention to the Fireproofing On Steel framed buildings in order to ensure that during per-determined fire scenarios that the steel does not rise above critical temperatures.

The amount and type of Fire Proofing Paint or spray is dependent on a number of variables, some of which include size of steel members in question, fire severity, fire rating or duration of exposure to a given fire, time of application of the fireproof covering, budget and location of project.

However it should be kept in mind for some lower fire ratings or durations, where load ratios are not extreme high because heavy gauge and high yield strength steel structures can withstand the effects of fire without any additional fireproof covering materials, testing standard time versus temperature curve apply.

Conventional spray applied materials: These are the oldest materials and at the same the most widely used form of fireproofing material. These are relatively speaking low density materials which are supplied in bags, and when mixed with water and sprayed as a type of slurry. The thicker the applied material, the higher is fire rating, within maximum thicknesses which prove the material’s adhesiveness to the steel during fire testing.

As per the current landscape, Fireproofing materials have been allocated in three distinct Generic categories which include:

1. Conventional spray applied materials
2. Board materials
3. In-tumescent paints

Board Materials:
Board materials, like conventional spray applied materials, have been preferred and used for quite a long time in Australia. Manufactured board materials can be cut as per the size and fixed around steel sections to provide the necessary fireproofing.

In-tumescent Paints :
In-tumescent paints are the newest form of fireproofing paint . They have been used in Australia for almost two decades. In-tumescent materials are those which expand to many times their original volume when exposed to heat. They are widely used in the Passive Fire Protection or Fire Stopping market.
Continue...


Monday, July 18, 2011

What is an intumescent coating - Passive Fire Protection Method

Posted by Fire Protection Coatings on 5:22 AM 4 comments

Fire Protection is the foremost key topic which is faced by both building owners and facility managers. Intumescent Coatings is the passive fire protection method which plays an important role in fire protection.


Fire protection systems are pioneer requirements to the operations of the facility for several reasons. However, the first as well as most important reason is to save lives. Nowadays, many fire protective coatings systems have been invented and out of them “Intumescent Coatings” is passive fire protection method.

What is Intumescent Coating?
It is a passive fire protection specialist paint which chemically reacts in a fire. The coating expands in size to form a char that protects the steelwork for a specified period of time from the heat of the fire.

Intumescent Coating:
The function of passive fire protection as well as protecting structural steel is to offer people inside the building time to leave the building. Steel is a very strong building material but at temperatures of 550C it starts to lose its structural integrity.

To cope up with such condition steel is protection is done through intumescent coating by commonly thick as well as solid coat which finished with a thin protective fire retardant, like a gloss. Such coating is normally applied by airless spray to offer a smooth decorative finish that remains stable at ambient temperatures. Compositions of intumescent coating are based on organic resin binders (Typically acrylated rubber or epoxy). 

Passive Fire Protection - Intumescent coatings offer steel structures with corrosion protection, fire protection (fire stop) and a visual decorative element if required. However, passive fire protection coating is a reactive layer, so it is very important to accomplish the correct thickness of dry film for obtaining the required fire resistance. There are several coats may require to be applied to construct up to a total dry coat thickness to give the required time protection.

In recent years, airless unit for applying intumescent coatings was a pneumatic pump having an air motor and it is capable of providing up to 4 - 5,000 psi at the pump. However, a unit requires a road compressor of about 150 cfm and is a heavy unit. 

As technology steps ahead, improvements in Passive Fire Protection intumescent formulation have been reduced the weight of coatings as well as the need for high pressure application. Nowadays, almost all intumescent coatings can be applied with a more compact self contained unit with either a petrol engine or an electric motor. 

Today, there are many online sources which offer Intumescent Coatings, cable penetration Seals, Mastic paint, KBS Coating, Cable Spraying, Cable Coating and more.

Robertson Coatings has been established in 2004. It is a diversified company specialized in offer commercial, industrial painting, KBS Coating, Mastic paint, intumescent coating, commercial re-painting, maintenance painting and many more. For more information about services as well as diverse products please do visit: http://www.robertsoncoatings.com.au

Continue...


Friday, January 7, 2011

Cable Coating For Electrical Cables- Cable Fire Protection Australia

Posted by Fire Protection Coatings on 8:59 PM 2 comments

Nowadays, present of cables in industrial places is very common. When we concern with the fire protection that time these cables are also not in exception. So, here you will get the ideas about Cable Fire Protection through cable coating.
Cabel Coating Australia

We all are familiar with that occurring of fire incidents very usual things in this technology oriented world. If we take a look inside of the industrial area then availability of cables are general; however, Fireproofing of these cables are awfully vital. There are many sources who are expert to offer you the Cable Coating Installers, KBS Coating Installer, Cable Fire Protection, KBS Coating etc. Here we will discuss about the Cable Coating for electrical cables.

Usually, electrical cables are insulated with Polyvinyl Chloride that contributes to a rapid spread of fire. At the time of passionate fire it gives off lethal fumes ignition and corrosive gases. Moreover, 1 kg of soft PVC with 35% Chloride content when concerned in Fire, produces 360 gms of Hydrogen Chloride gas, which is when dissolved in water vapours, results in 1 ltrs of smoking Hydrochloric acid. The propagation of fire in PVC cables is as fast as 20 mtrs per minutes.

The Cable Coating compound has been developed by AROMA. This compound is water based fire resistant compound for coating on electric cables to survive severe fire as well as to avert circulation along horizontal and vertical cable racks under intense fire conditions.

Silent features of Cable Coating for electrical cables:

- Stops propagation of fire along horizontal as well as vertical directions for a period exceeding 3 hours.
- Protects cables from indemnity caused by internal short circuit fires.
- Keeps cable protected for 20 minutes even during intense fire conditions.
-  Does not affect the current carrying capacity of the cables.
-  Let the cable to withstand sufficient load such as foot traffic.

Why to use Cable Coating?

- Preventing fire damage to the cables.
- To protect functioning of cables and increasing their resistance to fire / heat.
- Preventing the flame propagation through cables runs.
- Isolates cable runs into compartments with a view to localizing the fire.

Generally, it is recommended that cables near boilers where the temperature continuously remains above 50 deg; C. and are prone to Flame Licking, should be coated entirely. So, with sum above all you can easily come to know that how much cable coating is essential.

Robertson Coatings has been established in 2004. It is a diversified company specialized in offering Fireproofing with, KBS Coating Installer, Cable Fire Protection Australia, Cable Coating, KBS Coating, Fireproofing Spray, Fire Proof Paint, Fireproofing On Steel, Cable Coating Australia, KBS Coating, Commercial Painting, Penetration Seals, Intumescent Coating, Interior Fireproofing Paint, Painting Contractors, Maintenance Painting and many more. 

For more information about services as well as diverse products please do visit: http://www.robertsoncoatings.com.au

Continue...


Wednesday, December 15, 2010

Cable Fire Protection with Fireproofing Spray

Posted by Fire Protection Coatings on 10:00 PM 0 comments

Fireproofing Spray is very in demand as a fire stop system due to its standardized features. In ahead we will know about different advantages and properties of Fireproofing Spray.



Nowadays, Fireproofing is one of the required objects for both commercial and residential platform for fire stopping. There are many sources are available that offer fireproofing spray, fire proof paint, fireproofing for steel and more. Fireproofing spray is one of the methods that have been used in fire protection for cable fireproofing or fireproofing on steel.

We know that Cable Fireproofing is done with many kinds of tactics. But here you will be known its spray tactic means features of Fireproofing Spray and what you should keep in mind before going with cable spraying provides. Moreover, you can also come to know about different fireproofing spray equipment.

Some Fireproofing Sprays offer water-based intumescent coating consisting of polyvinyl acetate resins as well as fillers for the fire protection of structural steel. Further, this type of fireproofing is preferably spray applied directly to the contour of primed 'I' and 'H' section columns and beams, and hollow sections, to provide fire protection for up to 120 minutes.


Advantages of Fireproofing Spray:

Offers fire resistance up to 120 minutes in accordance with BS476: Part 21 and AS1530 Part 4 and up to 180 minutes in accordance with ASTM E119.


  -- Finish: Durable and decorative
  -- Steelwork may be left exposed to view
  -- Chemical as well as abuse resistant
  -- Top coated to match surroundings
  -- Easy application
  -- Easy clean up with water
  -- Quick drying

    If we talk about the practical coverage of Fireproofing Spray then it depends on surface texture, substrate, application method and technique. Following are few properties and performance of fireproofing spray:


      -- Theoretical coverage: Approximately 27m2/pail at 0.5mm dry film thickness (DFT)
      -- Number of coats: One or more as required
      -- Cure: By air drying
      -- Initial set: Approximately 6 hours at 20°C and 50% RH for 0.4mm WFT
      -- Solids by weight: 70% ± 2%
      -- Density: 1.33kg/litre

      To get the Fireproofing Spray Fire Protection there are many online sources available that offer Fire Proof Paint, Fireproofing On Steel, Fireproofing Spray, Cable Coating, Mastic Paint and many more. So, utilize these online sources and make commercial building, school or residential building construction fireproof.

      Robertson Coatings has been established in 2004. It is a diversified company specialized in offer Commercial, Industrial Painting, Fireproofing Spray, Cable Coating Australia, Fireproofing For Steel, Intumescent Coating, Commercial Re-Painting, Maintenance Painting and many more.

      For more information about services as well as diverse products please do visit: http://www.robertsoncoatings.com.au
      Continue...


      Friday, December 10, 2010

      Cable Coating Installers in Australia for Fire Stop System

      Posted by Fire Protection Coatings on 10:13 PM 0 comments

      Today, Fire Stop with KBS Coating is more in demand. It is passive fire protection for cable coating. Here, we will be able to get idea about the scope of application for KBS coating.
      Fire Stop System
      KBS Coating is one of the passive fire stop system. This passive fire protection from KBS Coating installer is an all around fire safety concept that embraces the passive measures in fire containment design as well as in addition augments the active measures. 

      Moreover, this KBS coating Australia is work with a proactive approach taken at the building design stage and intended at addressing an inclusive solution to the fire problem. KBS coating is a water-based fire protective coating that has been invented to provide the fire protection of Fire Stop to group or bundled electrical cables through cable coating. 

      The key aspect of KBS Coating is to stop flame circulation along vertical and horizontal cable ways. Furthermore, where circuit veracity based on the remoteness of the cables from fire as well as the incurred temperature that time KBS Coating can delay short circuit. 

      Passive Fire Protection
      According the insurance companies, engineers and architects fires are no longer a calculable risk. The defeat to a production facility or business due to fire can be fiscally staggering as well as sometimes crippling. Conversely, the majority of these fires are spread through the electrical cable or PVC piping system and KBS Coating is one of the ways to stop these fire accidents. This KBS Coating Australia, Cable Coating Systems do not require power or water to operate in case of fire.





      The Scope of Application for Passive Fire Protection is in following Areas:

      --  Structural fire protection


      --  Compartmentation and containment of fire spread

      --  Safe escape routes as well as sage refuge for occupants

      --  Life safety of fire service personnel

      --   Preserving the function of active fire safety measures. 

      If we take a look in to the present situation of passive fire protection market in Australia then it is in developing stage, concentrated on the passive fire protection for load bearing structures (beam and columns) using concrete mostly in the industrial segment.

      Nowadays, there are many accredited contractors as well as specialist supplier for offering state-of-the-art Passive Fire Protection Cable Coating that works as a fire retardant or resist fire and its effects. In addition, they also offer Interior Fireproofing, Fireproofing on Steel and many more. So, according to the requirement of your home, school, business place you can utilize the different fire protection services of these fire stop system provider. 


      Robertson Coatings has been established in 2004. It is a diversified company specialized in offer Commercial, Industrial Painting, KBS coating Australia, Cable Coating, Fire Stop, Mastic Paint and many more. 
      For more information about services as well as diverse products please do visit: http://www.robertsoncoatings.com.au

      Continue...


      Friday, November 26, 2010

      Trend of Cable Penetration Seals for Fire Proofing

      Posted by Fire Protection Coatings on 12:59 AM 1 comments

      As per invention of technology ways of Fire Stop System are also altered. Here we will trash out the Cable Penetration Seals – widely adaptable fireproofing system. 

      Penetration Seals
      In the industrial area use of cable is very normal so cables located in the plant present a risk for room to room fire, smoke as well as gas transfer. So, Penetration Seals segment provides protection to the area from fire chain reaction. 

      KBS cable penetration seals offer reliable protection in the spread of fire and smoke. The KBS Panel Seal is a Cable Penetration Seal consisting of non-combustible mineral fibre boards combined with ablative products (ABL) or – alternatively – with intumescent products (INT)

      There are 3 types of Penetration Seals as following:

       - KBS Panel Seal: It is single as well as double panel seals for fire-resistant cable penetrations
       - KBS Panel Seals: They are used to close through-penetration fire-stops for cables and cable trays in walls   and floors, smoke-gas tight and fire-resistant
       - KBS Coating with combination of KBS Sealant is used for the KBS Panel Seal ABL

      Moreover, KBS Foamcoat and the corresponding putty KBS® Foamcoat C11 are employed for the intumescent type KBS Panel Seal INT. Cable panel seal can be installed as single-panel or as double-panel seal depending on the requirements with regard to fire resistance. The Penetrating Cables and trays as well as the visible surfaces of the mineral fibre boards are coated in accordance with the corresponding national tests/approvals.



      Features of Cable Penetration Seals Provider


        - Able to pull new or remove old cables and easily reinstall the designed Fire Protection System
       - Offers completed work insuring correct installation. 
       - Design drawings are assembled to allow each step of the process that enables to be understood by a novice installer. 
       - Able to offer corrective maintenance which can be performed 10, 20, even 30 years from now. 
       - System designs are installed by SRE’s trained and certified installers. 
       - Ability to install while the unit is live as well as to accommodate openings up to 6’’ in diameter. 

      There are many physical and online sources which offer Cable Fire Protection Australia, Fireproofing or Intumescent Mastic Paint, Cable Spraying, Painting Contractors, Fireproofing Spray and many more. So, you can select the proper Cable Penetration Seals provider as per your need.

      For more information about services as well as diverse products please do visit: http://www.robertsoncoatings.com.au
      Continue...


      Saturday, November 13, 2010

      Fire Protection with KBS Cable Coating

      Posted by Fire Protection Coatings on 1:42 AM 1 comments

      We know that fire incidents can be occur anytime so usually we always follow basic or pioneer Fire Stop System to cope up with such fire incidents. Today, cable is one of the applicable objects to any kind of business so its Fire Protection is also required. So, here we will discuss about the different ways of Cable Coating Application.

      Cables are in pioneer need of this technology world and if we think about the Fire Protection then cables are not exceptions from this. Usually KBS Coating is a water-based fire protective coating which is invented for offering the Fire Protection to group or bundled electrical cables as well as to Penetration Seals.

      Moreover, the main function of  KBS Coating is to stop flame circulation along vertical as well as horizontal cable ways. Additionally where circuit integrity depends on the distance of the cables from fire and the incurred temperature that time KBS Coating can delay short circuit.

      KBS Coating shields electrical cables via ablation instead of insulation. Further, it is dense as well as thermally conductive in duration of normal cable operating temperatures. There are different ways for applying the KBS Coating so, take a look to these methods.

      Surface Preparation
      In this cleaning of cables is not required but oil or grease should be removed with dry rags (no solvent). Use of broom or vacuum cleaner is advisable to remove heavy layers of dust.

      Spray
      This Fire Protection is done in the conventional way by spraying crosswise. In such type of application white of the coating should well cover the color of the cable jacket and the wet thickness of the coating must be at least 2.5 mm on all exposed sides. Normally, the required thickness may be applied in one coat.

      Brush:  
      Cable Coating through the brushing application requires numerous coats to build up the required thickness. Further, a thin coat applied first and then allowed to dry will aid in building up the required thickness.

      Hand:
      This Cable Coating tactic is adaptable in large diameter single cables or bundles; however, to achieve a smooth finish use of wet brush is advised. Moreover, thin coat should be allowed to dry before the rest is applied, using both hands like an extrude.

      Robertson Coatings has been established in 2004. It is a diversified company specialized in offer commercial, Cable Coating Australia, KBS Coating, Mastic Paint, intumescent coating Interior Fireproofing, maintenance painting and many more.

      For more information about services as well as diverse products please do visit: http://www.robertsoncoatings.com.au
      Continue...


      Monday, October 25, 2010

      Penetration Seals -- Learn About Advantages and Types

      Posted by Fire Protection Coatings on 10:31 PM 2 comments



      Penetration Seals are one of the Fire Stop System that mostly related to cables as well as pipe fire resistance. It is consist of many types and offers diverse benefits which we will discuss ahead. 

      Penetration Seals are interlocked rubber links which are designed to offer a leak-proof and insulated seal that fills up the space of pipe penetrations.  These seals fit around piping going through walls, manholes, floors, tanks, vaults, dikes and pipeline casing for providing a gas as well as watertight seal.

      Penetrations Seals are constructed from standard material EPDM rubber to suite the most application and have been tested to withstand a hydrostatic seal up to psig or 40 feet of head pressure. If we take a look of Penetrations Seals construction then its Nitrile rubber is available to offer service for solvents, hydrocarbons, oil, gas and jet fuel; however, Silicone included for high temperature applications. Further, Penetration Seals are reusable, economical as well as easily installed. These Penetration Seals available in many sizes to fit nearly every pipe like 1/2" pipe to 98" pipe.

      Types of Penetration Seals:

      Penetration Seals
      Cable Penetration Seals:
      These seals are Fire Protection Systems with a fire resistance period of 60 to 120 minutes on the basis of:
                  - Mineral wool slabs coated with intumescent coating
                  - Mortar seals and cable boxes

      Mixed Penetration Seals:
      It is Fire Protection Systems with a fire resistance period of 90 minutes on the basis of mineral wool slabs coated with an intumescent coating for cable and pipe conduits.

      Pipe Penetration Seals:
      Fire protection systems with a fire resistance period of 90 minutes on the basis of Pipe closure devices (collars) and Mineral wool slabs. Pipe Penetration seals are used to allocate tubes or pipes to enlarge thermally. They enter into the shell of a boiler or similar pressure casing without damaging the surrounding shell or pressure casing.

      Single Cable Penetration Systems:
      It can easily be routed through solid walls and ceilings or light partition walls of a minimum thickness of 80 mm using the MLAR.

      Single Pipe Penetration Systems
      They are non-inflammable (upto 160 mm diam.) and single inflammable (upto 32 mm diam.).

      Advantages of Penetration Seals :

          - Personnel are protected and reduced pipe stress.
          - No leaks and Noise reduction.
          - Amplified boiler efficiency
          - No maintenance

      So, utilize the different types as well as benefits of Penetration Seals according to your application. There are many online sources available through which you can have more apart from Penetration Seals like KBS Coating, Cable Spraying, Interior Fireproofing, Fireproofing for Steel and many more.

      Robertson Coatings has been established in 2004. It is a diversified company specialized in offer Commercial, Cable Coating Australia, KBS Coating, Penetration Seals, Mastic Paint, Fireproofing for Steel, Interior Fireproofing, Painting Contractors and many more.

      For more information about services as well as diverse products please do visit: http://www.robertsoncoatings.com.au


      Continue...


      Monday, September 13, 2010

      Fireproof Paint for Industrial & Commercial Buildings with Painting Contractors

      Posted by Fire Protection Coatings on 3:57 AM 6 comments


      Nowadays Schools, Commercial Buildings, large domestic and large industrial require the Fire Stop System. As technology goes ahead there are many fire stop systems have been invented like Fire Retardant Application, KBS Coating, Cable Coating, Cable Penetration Seals and many more. Here we will discuss about Fire Retardant Application.

      A Fire Retardant Application works as the idyllic Fire Stop System for your home as well as office. Fundamentally this fireproofing is a specially formulated essence which helps to prevent the fire of the object on which it is applied. It is one of the most common stuffs used by fire fighters when they are faced with fire.


      The use of fire retardants producer is no longer constrained to combating flames while they broke out. Somewhat they are now being used on a wide size in homes as well as offices to prevent substances from allowing fire to spread quickly. Put differently A Fire Retardant Applications slows down the widen of fire allowing fire fighters to come and do their job prior to your property and the lives of the people in house gets at risk.

      As per the recent survey more than 300 the personal losses faced by those who are victims of these fires the country itself loses over 600 billion dollars annually in trying to recoup the damage caused by such fires. Once the fire has been breaking out it is increasing at an alarming rate, especially because of the raised level of heat in the atmosphere. This further raises the importance of making use of flame retardant solutions in homes and offices.

      One technique of exploiting a fire retardant manufacturer is through the conventional fire extinguisher. This is full of the typical “A” class flame retardant chemical compound. Normally every building should have one of these fire extinguishers. However, by Fireproofing your home completely with the utilization of appropriate fire retardant solutions you can swallow the problem in the shoot.

      However, today there are many companies that offer specialized fire retardants application services like KBS Coating Installer, Cable Spraying, Cable Coating, Mastic Paint, Fireproofing on Steel, Fireproofing Spray and many more for homes and offices.

      In order to ensure that your property will not be spoiled due to the chemical content of fire retardant solutions you require to take the time out to find the right company.

      Before hiring Fire Stop System of any company you should check the kind of guarantee that they provide for their services. Hence you need to make sure of two aspects when looking for Fireproofing Application Services, the first its quality and the second its cost.

      About KBS Coating:
      Since 2004 Robertson Coatings has been providing its services in diverse area of fire protection. It is a diversified company specialized in offer Commercial, Industrial Painting, Painting Contractors, KBS Coating, Fire Stop System, Mastic Paint, Intumescent Coating, Commercial Re-Painting and many more.
      For more information about services as well as diverse products please do visit: http://www.robertsoncoatings.com.au/
      Continue...


      Saturday, August 21, 2010

      Fireproofing for Steel - Intumescent Coatings

      Posted by Fire Protection Coatings on 3:20 AM 2 comments

      Fire Protection is the foremost key topic which is faced by both building owners and facility managers. Intumescent Coatings is the passive fire protection method which plays an important role in fire protection.


      Fire protection systems are pioneer requirements to the operations of the facility for several reasons. However, the first as well as most important reason is to save lives. Nowadays, many fire protective coatings systems have been invented and out of them “Intumescent Coatings” is passive fire protection method.




      What is Intumescent Coating?
      It is a passive fire protection specialist paint which chemically reacts in a fire. The coating expands in size to form a char that protects the steelwork for a specified period of time from the heat of the fire.

      Intumescent Coating:
      The function of passive fire protection as well as protecting structural steel is to offer people inside the building time to leave the building. Steel is a very strong building material but at temperatures of 550C it starts to lose its structural integrity.

      To cope up with such condition steel is protection is done through intumescent coating by commonly thick as well as solid coat which finished with a thin protective fire retardant, like a gloss. Such coating is normally applied by airless spray to offer a smooth decorative finish that remains stable at ambient temperatures. Compositions of intumescent coating are based on organic resin binders (Typically acrylated rubber or epoxy).

      Passive fire protection - Intumescent coatings offer steel structures with corrosion protection, fire protection (fire stop) and a visual decorative element if required. However, passive fire protection coating is a reactive layer, so it is very important to accomplish the correct thickness of dry film for obtaining the required fire resistance. There are several coats may require to be applied to construct up to a total dry coat thickness to give the required time protection.

      In recent years, airless unit for applying intumescent coatings was a pneumatic pump having an air motor and it is capable of providing up to 4 - 5,000 psi at the pump. However, a unit requires a road compressor of about 150 cfm and is a heavy unit.

      As technology steps ahead, improvements in passive fire protection intumescent formulation have been reduced the weight of coatings as well as the need for high pressure application. Nowadays, almost all intumescent coatings can be applied with a more compact self contained unit with either a petrol engine or an electric motor.

      Today, there are many online sources which offer intumescent coating, cable penetration Seals, Mastic paint, KBS Coating, Fireproofing, Cable Coating and more.
      Continue...


      Related Posts with Thumbnails