KBS Coating Australia, Fire Protection System, Cable Spraying, Cable Coating Australia, KBS Coating Installer, Fire Stop System, Painting Contractors, Fireproofing, Penetration Seals, Fireproofing Spray

Wednesday, November 2, 2011

Advantages of Interior Fireproofing with Mastic Paint & Cable Spraying

Posted by Fire Protection Coatings on 2:25 AM 0 comments

Interior Fireproofing has become essential on walls, roofs, floors as well as doors and windows. The materials used now a days are not at all resisitant to fire because everyone wants to go for stylish interior, but have you considered if a fire breaks out may be not at your home but even at neigherhood, you are prone to it. Your stylish doors and walls won't stop them. You need to have interior fireproofing for all of these.
If you are planning a new house, do take this into consideration as it would make your work a whole lot easier. However homeowners can make existing interior doors fireproof using Mastic Paint or Cable Spraying as suggest by your Painting Contractor. There are many Painting Contractors in the market but don't forget to their services into account. Reliability and trustworthyness should also be considered. So always be careful when chosing the one for your precious home.

Generally Mastic Paint is ideal for use in a diverse variety of commercial, social and industrial environments where conventional fireproofing is not satisfactory or appropriate as a finish. The Fire Proof intumescent Mastic Paint will withstand weathering conditions, dangerous chemical fumes and a range of other severe environmental abuses.

Fireproofing by Cable Spray is done in the conventional way by spraying in a cross manner . It is a latex-based, spray applied coating designed to protect electrical cables against the bursting of fire. Cable Spraying, when properly installed, will limit spread of flames and provide short-term circuit integrity during a fire break out. In cable spraying, wet thickness of the coating must be minimum 2.5 mm on all sides. 

Moreover, if you want to fireproof hard to- get- at places, then an extension nozzle can be used. The fire protective Cable Spray must be water-based. The coating should dry to form a flexible coating which is water as well as weather-resistant film and should contain no other solvents, or inorganic fibers. The coating should be capable enough of being applied by brush or by airless spray. The approved coating should be FM Systems Approved.

Characteristics of these fireproof materials are that they are water-based and can be used for easy installation. They are Thyrotrophic for high-build application, Safe with No solvents and asbestos, Nonhalogenated, water resistant, etc. They also provide longer pump life and requires less maintenance too.

Interior FireProofing of Doors can also be done by replacing them with secured, fireproofed doors. These doors are usually constructed from heavy-grade chip board and are infused with fireproofing solvent. Comparatively thicker than standard interior doors, they provide about 30 to 60 minutes of fire resistance when fire breaks out. But this increases expense or should be used when starting construction.


Robertson Coatings is a diversified company specialising in commercial, commercial re-painting, maintenance painting and mining works, including FireProof Paint, Fireproofing and Firestopping for the Mining Sector. Robertson Coatings services all areas of Australia and maintains a 100% safety record, with zero accidents, injuries or incidents.


0 Responses so far:

Leave a Reply

Related Posts with Thumbnails