KBS Coating Australia, Fire Protection System, Cable Spraying, Cable Coating Australia, KBS Coating Installer, Fire Stop System, Painting Contractors, Fireproofing, Penetration Seals, Fireproofing Spray

Monday, October 25, 2010

Penetration Seals -- Learn About Advantages and Types

Posted by Fire Protection Coatings on 10:31 PM 2 comments



Penetration Seals are one of the Fire Stop System that mostly related to cables as well as pipe fire resistance. It is consist of many types and offers diverse benefits which we will discuss ahead. 

Penetration Seals are interlocked rubber links which are designed to offer a leak-proof and insulated seal that fills up the space of pipe penetrations.  These seals fit around piping going through walls, manholes, floors, tanks, vaults, dikes and pipeline casing for providing a gas as well as watertight seal.

Penetrations Seals are constructed from standard material EPDM rubber to suite the most application and have been tested to withstand a hydrostatic seal up to psig or 40 feet of head pressure. If we take a look of Penetrations Seals construction then its Nitrile rubber is available to offer service for solvents, hydrocarbons, oil, gas and jet fuel; however, Silicone included for high temperature applications. Further, Penetration Seals are reusable, economical as well as easily installed. These Penetration Seals available in many sizes to fit nearly every pipe like 1/2" pipe to 98" pipe.

Types of Penetration Seals:

Penetration Seals
Cable Penetration Seals:
These seals are Fire Protection Systems with a fire resistance period of 60 to 120 minutes on the basis of:
            - Mineral wool slabs coated with intumescent coating
            - Mortar seals and cable boxes

Mixed Penetration Seals:
It is Fire Protection Systems with a fire resistance period of 90 minutes on the basis of mineral wool slabs coated with an intumescent coating for cable and pipe conduits.

Pipe Penetration Seals:
Fire protection systems with a fire resistance period of 90 minutes on the basis of Pipe closure devices (collars) and Mineral wool slabs. Pipe Penetration seals are used to allocate tubes or pipes to enlarge thermally. They enter into the shell of a boiler or similar pressure casing without damaging the surrounding shell or pressure casing.

Single Cable Penetration Systems:
It can easily be routed through solid walls and ceilings or light partition walls of a minimum thickness of 80 mm using the MLAR.

Single Pipe Penetration Systems
They are non-inflammable (upto 160 mm diam.) and single inflammable (upto 32 mm diam.).

Advantages of Penetration Seals :

    - Personnel are protected and reduced pipe stress.
    - No leaks and Noise reduction.
    - Amplified boiler efficiency
    - No maintenance

So, utilize the different types as well as benefits of Penetration Seals according to your application. There are many online sources available through which you can have more apart from Penetration Seals like KBS Coating, Cable Spraying, Interior Fireproofing, Fireproofing for Steel and many more.

Robertson Coatings has been established in 2004. It is a diversified company specialized in offer Commercial, Cable Coating Australia, KBS Coating, Penetration Seals, Mastic Paint, Fireproofing for Steel, Interior Fireproofing, Painting Contractors and many more.

For more information about services as well as diverse products please do visit: http://www.robertsoncoatings.com.au



2 Responses so far:

adamjones said...

Nice post. Thank you for sharing useful information about different types of fire penetration seals and their advantages. Keep sharing!!

Ankur said...

Good information on advantages of fire penetration seals in this article.

Leave a Reply

Related Posts with Thumbnails