Cable Coating Installers Australia - KBS Coating installation

The Fire Stop System also includes the water-based coating in other words weather resistant Cable Coating. In following we are going to confer about the KBS Coating, Cable Penetration Seals with KBS and many more.

Wheatear it is commercial or residential places all require the Fireproofing. However, Fireproofing also must be weather resistant. KBS Coating is one of last out resistant Fire Stop System; it is a water-based ablative Cable Coating that is tough, flexible as well as weather resistant.

As per insurance companies, engineers as well as architects fires are no longer a calculable risk. The loss to a production facility or business because of fire can be financially staggering as well as sometimes crippling. However, the majority of these fires are spread through the electrical cable or PVC piping system and KBS Coating is one of the ways to stop these fire accidents.

KBS Coating stops flame-spread along vertical or horizontal cables as well as extends circuit integrity devoid of affecting the current-carrying capacity. Cable Spraying with KBS Coating must be effectively tested to different standards like DIN 4102, IEC 332-3, FM3971, BS 476 and ASTM 2863.

KBS Sealbags: These are expanding pillows for through-penetration Cable Penetration Seal. These unique fire pillows are ideal Penetration Seals where changes like retrofitting of cables or metal pipes are the rule rather than the exception. These KBS Sealbags must be tested to international standards and have ratings of up to 240 minutes.

KBS Mortar: It is a penetration seal for through-penetration Fire Stop System or saturation seal which offers a non-shrinking, homogenous as well as smoke gastight seal for cables and utility penetrations in walls and floors. They must be tested to international standards and carries ratings from 60 to 240 minutes.

KBS Panel Seal: It is a single or double panel Penetration Seal for through-penetration Fire Stop System. KBS Panel Seal offers smoke gastight as well as Fire-Resistant Seal around penetration utilities like cables, cable trays, pipes and ducts. They require to be tested to international standards and carry ratings of up to 240 minutes.

Today, there are many accredited contractors and specialist supplier for offering state-of-the-art Passive Fire Protection Cable Coating that act as a fire retardant or resist fire and its effects. They also provide Interior Fireproofing, Fireproofing on Steel and many more. So, as per requirement of your home, school, business place you can utilize the different fire protection services of these fire stop system provider.

Robertson Coatings has been established in 2004. It is a diversified company specialized in offer Commercial, Industrial Painting, KBS Coating, Mastic Paint, Fireproofing, Intumescent Coating, Commercial Re-Painting, Maintenance Painting and many more.

For more information about services as well as diverse products please do visit: http://www.robertsoncoatings.com.au

Continue...

Fireproof Paint for Industrial & Commercial Buildings with Painting Contractors

Nowadays Schools, Commercial Buildings, large domestic and large industrial require the Fire Stop System. As technology goes ahead there are many fire stop systems have been invented like Fire Retardant Application, KBS Coating, Cable Coating, Cable Penetration Seals and many more. Here we will discuss about Fire Retardant Application.

A Fire Retardant Application works as the idyllic Fire Stop System for your home as well as office. Fundamentally this fireproofing is a specially formulated essence which helps to prevent the fire of the object on which it is applied. It is one of the most common stuffs used by fire fighters when they are faced with fire.

The use of fire retardants producer is no longer constrained to combating flames while they broke out. Somewhat they are now being used on a wide size in homes as well as offices to prevent substances from allowing fire to spread quickly. Put differently A Fire Retardant Applications slows down the widen of fire allowing fire fighters to come and do their job prior to your property and the lives of the people in house gets at risk.

As per the recent survey more than 300 the personal losses faced by those who are victims of these fires the country itself loses over 600 billion dollars annually in trying to recoup the damage caused by such fires. Once the fire has been breaking out it is increasing at an alarming rate, especially because of the raised level of heat in the atmosphere. This further raises the importance of making use of flame retardant solutions in homes and offices.

One technique of exploiting a fire retardant manufacturer is through the conventional fire extinguisher. This is full of the typical “A” class flame retardant chemical compound. Normally every building should have one of these fire extinguishers. However, by Fireproofing your home completely with the utilization of appropriate fire retardant solutions you can swallow the problem in the shoot.

However, today there are many companies that offer specialized fire retardants application services like KBS Coating Installer, Cable Spraying, Cable Coating, Mastic Paint, Fireproofing on Steel, Fireproofing Spray and many more for homes and offices.

In order to ensure that your property will not be spoiled due to the chemical content of fire retardant solutions you require to take the time out to find the right company.

Before hiring Fire Stop System of any company you should check the kind of guarantee that they provide for their services. Hence you need to make sure of two aspects when looking for Fireproofing Application Services, the first its quality and the second its cost.

About KBS Coating:

Since 2004 Robertson Coatings has been providing its services in diverse area of fire protection. It is a diversified company specialized in offer Commercial, Industrial Painting, Painting Contractors, KBS Coating, Fire Stop System, Mastic Paint, Intumescent Coating, Commercial Re-Painting and many more.

For more information about services as well as diverse products please do visit: http://www.robertsoncoatings.com.au/

Continue...

Passive Fire Protection Methods- Intumescent Coatings

What is an Intumescent Coating?

An intumescent coating is a passive fire protection specialist paint that chemically reacts in a fire. The coating expandsin size to form a char, which protects the steelwork for a specified period of time from the heat of the fire.

Why do you need an Intumescent Coating?

The purpose of Passive Fire Protection and protecting structural steel is to give people inside the buildingtime to leave the building. Steel is a very strong and versatile building material, but at temperatures of 550C it begins to loose its structural integrity.

Intumescent for steel protection is commonlythick and opaque and finished with a thin protective fire retardant coat, like a gloss. Intumescent Coatings are normally applied by airless spray to provide a smooth decorative finish, which remains stable at ambient temperatures. . These coating compositions are based on organic resin binders, which are typically acrylated rubber or epoxy.


When dry, a passive fire protection intumescent coating is a reactive layer, so it is very immportantto achieve the correct thickness of dry film to obtain the required fire resistance. The film thickness is measured wet with a wet-film gauge, as a certain wet film thickness will dry to a specific dry film. Several coats may need to be applied to build up to a total dry coat thickness to give the required timeprotection.

The resins are filled with active ingredients, whichreact in a fire at temperatures around 250C to form a thermally insulating carbonaceous char or foam. The char can be expandedup to 50 times the original coating thickness.

As described above the basic formulation of an passive fire protection intumescent comprises of an organic binder, a carbonific, usually a penta or dipentaerythritol, a spumific or blowing agent which could be melamine or a melamine formaldehyde derivative, a source of an acid catalyst such as ammonium polyphosphate and additionally a char reinforcing pigment.

As the temperature risesthe binder begins to melt and the blowing agent liberates gases causing a controlled expansion. At the same time there is degradation of the carbon backbone and fusion of the inorganic reinforcing materials, resulting in char solidification.

In modernsteel and glass commercial buildings, exposed steelwork is sometimesan integral design feature. Intumescent coatings allow steel to be used as an designfeature (where fire protection boards would not) while also meetingto building regulations.

Intumescent passive fire protection coatings provide steel structures with corrosion protection, fire protection and a visualdecorative element if required.

Until recentyears, the typical airless unit for applyingintumescent coatings was a pneumatic pump having an air motor and capable of providing up to 4 - 5,000 psi at the pump. Such a unit requires a road compressor of about 150 cfm and is a heavy unit.

Improvements in passive fire protection intumescent formulation have reduced the weight of coatings and the need for high pressure application. Today, almost all intumescent coatings can be applied with a more compact self contained unit witheither a petrol engine or an electric motor.

In the UK, petrol engine units are more widely usedover electric because electric power is often not available on site at the early stage of construction when the intumescent is applied.

Special conditions:
Hydrocarbon fires tend to show a very fastrate of heating combined with extreme turbulence and result from the burning of hydrocarbon based fuels such asoil and gas. Therefore a specialpassive fire protection paint is required. Specialist intumescent coatings have been developed to cope with the aggressivenature of hydrocarbon fires, where resistance to blast overpressure and jet fire is a strong probability.

Oil and gas projects exist in some of the most aggressive environmental conditions and require not onlyfire protection but also exceptionally durable coatings. Epoxy intumescents are capableto provide not only the fire protection requirements, but also blast resistance and extreme durability to the worst weather conditions.

Read more: http://www.articlesnatch.com/Article/Passive-Fire-Protection-Methods--Intumescent-Coatings/1428984#ixzz0xhpaSQLW

Continue...

Fireproofing for Steel - Intumescent Coatings

Fire Protection is the foremost key topic which is faced by both building owners and facility managers. Intumescent Coatings is the passive fire protection method which plays an important role in fire protection.

Fire protection systems are pioneer requirements to the operations of the facility for several reasons. However, the first as well as most important reason is to save lives. Nowadays, many fire protective coatings systems have been invented and out of them “Intumescent Coatings” is passive fire protection method.




What is Intumescent Coating?
It is a passive fire protection specialist paint which chemically reacts in a fire. The coating expands in size to form a char that protects the steelwork for a specified period of time from the heat of the fire.

Intumescent Coating:
The function of passive fire protection as well as protecting structural steel is to offer people inside the building time to leave the building. Steel is a very strong building material but at temperatures of 550C it starts to lose its structural integrity.

To cope up with such condition steel is protection is done through intumescent coating by commonly thick as well as solid coat which finished with a thin protective fire retardant, like a gloss. Such coating is normally applied by airless spray to offer a smooth decorative finish that remains stable at ambient temperatures. Compositions of intumescent coating are based on organic resin binders (Typically acrylated rubber or epoxy).

Passive fire protection - Intumescent coatings offer steel structures with corrosion protection, fire protection (fire stop) and a visual decorative element if required. However, passive fire protection coating is a reactive layer, so it is very important to accomplish the correct thickness of dry film for obtaining the required fire resistance. There are several coats may require to be applied to construct up to a total dry coat thickness to give the required time protection.

In recent years, airless unit for applying intumescent coatings was a pneumatic pump having an air motor and it is capable of providing up to 4 - 5,000 psi at the pump. However, a unit requires a road compressor of about 150 cfm and is a heavy unit.

As technology steps ahead, improvements in passive fire protection intumescent formulation have been reduced the weight of coatings as well as the need for high pressure application. Nowadays, almost all intumescent coatings can be applied with a more compact self contained unit with either a petrol engine or an electric motor.

Today, there are many online sources which offer intumescent coating, cable penetration Seals, Mastic paint, KBS Coating, Fireproofing, Cable Coating and more.

Continue...